Home |
Search |
Today's Posts |
|
#1
![]()
Posted to rec.audio.tech
|
|||
|
|||
![]()
"Phil Allison" wrote in message
... wrote in message ups.com... ** Groper alert ! I've been reading here frequently lately and need some help today. Anyway, I want to know if the power amps in tube combos cover 20 Hz to 20,000 Hz like home stereo tube amplifiers +/- 1 dB or if tube guitar amps are made different/cheaper and cover less of a range with less accuracy say 60 Hz to 15,000 Hz +/- 3dB. I've been looking for specs but they don't seem to list them. ** LOL - guitar amps do not have published specs other than the (dubious) watts figure. With a few rare exceptions aside, tube guitar amps have tailored frequency responses similar to the speakers they are intended to drive. Most have a rising high frequency response that peaks out at between 5kHz and 10 kHz. Because the output impedance is high ( ie low damping factor) the response depends on the speaker's impedance curve at high frequencies as well. Guitar speakers have a rising impedance curve above 500 Hz. The available power output falls off below 60 Hz and above 8 kHz in most cases too, while the THD figure is typically around 3% at most power levels below clipping. The basic design of most tube guitar amps is derived straight from 40s tube radios. It sure ain't hi-fi. ....... Phil Yes, and much of pop/rock music lead guitar sound is derived from driving the amp into heavy distortion : ) John |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Some Recording Techniques | Pro Audio | |||
Some Mixing Techniques | Pro Audio | |||
Guitar and panning | Pro Audio | |||
Help with home recording classical guitar! | Pro Audio | |||
Which 6550 for SVT reissue? | Vacuum Tubes |