Alright. It's gotta go.

I have an MCI 500 (unsure of the series - circa 1976-77) automated
series console here full of modules that I am going to remove from the
frame. That's 32 modules and some master modules that I need to get rid
of.

I will happily send these things off to a new home for the best
reasonable offer I get. I'll be starting with the lower numbered
modules and working my way up into the more sketchy ones. Those of you
who know how old this unit is will understand that it is USED (very
used - it began life at Total Access in Redondo Beach with Great White,
Husker Du and other creepy groups) and that it has been out of service
for seven years.

Some modules have P&G faders and Aphex VCAs (it's an automated console
- JH50 automation) Most modules were re-switched with new 12 post
switches in 1990. I still have a bag of extra new switches (mostly 12
pin) around here too. And the little spade mute lights - I have about
seventy of those. And there is an extender board for servicing the
modules in-place. Try to find one of those on ebay. It has a full
patchbay that may require a chainsaw to remove the wires from. I have
the manuals and other little bits.

There are two power supplies and an Automation power supply. They weigh
a ton. There is a compartment underneath the console that houses the
automation boards, too.

Everything on this board is for sale, so long as it's worth my while to
pull the pieces and mail them. I'm in Alaska so the shipping will be a
little high, but not unfair.

First come, first served. In three weeks I'll make an announcement
about any other remaining bits or toss the whole thing in the dump.
It's too heavy to ship and I'm cleaning out the warehouse that it's in.

Send me an email of what you're interested in and I'll get back to you
when I get the parts consolidated.

kurt@
surrealstudiosDOTCOM


Kurt Riemann