Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Posted to rec.audio.opinion
MD
 
Posts: n/a
Default Blind Testing - Some Further Thoughts

John Atkinson wrote:

At HE2005 -- see http://www.stereophile.com/news/050905debate --
Arny Krueger made the point that sighted listening changes the
listener's state of mind. This, of course, is correct, but so does
blind
listening, though in a different manner. I offer some further thoughts
on
this at http://www.stereophile.com/asweseeit/406awsi .

John Atkinson
Editor, Stereophile

John

Usually I support your opinions and actually don't disagree with all of
the points you and others use against A/B sightless comparisons.
However - I have done a small amount of A/B (mostly with the capability
for fast switching) and I found it very useful. While I understand that
equipment near the same price point or quality might be hard to tell
apart sighted or not one should expect an immediate A/B difference when
the price points jump especially when the piece you compare to costs
twice as much or more. If I couldn't A/B my Triangle Celius 202's with
speakers $5k or more in price difference and hear an immediate
difference (one I assume I should like) then it would make no sense to
me to spend that much more money. (Maybe the $5k difference example is
not disparate enough - however my point should still stand). Having
said this I agree that there comes a point where the cost trade off
becomes steeper. At some point one has to pay a lot more to get a
little difference - at this point I could see sighted tests not being
helpful.

Have you guys ever tried blind tests to see if you can pick out the
"better" units? Maybe a Vandersteen 3 and something that covers the
same freq range but costs much more? Maybe a Rotel amp and the Halcro?
Maybe a good Music Hall TT set up against a top of the line player?
Or an NAD Player against. . .well you get the point. Heck - you guys
should even try a whole system A/B to see if you can tell. (I'd imagine
the speakers would have to use the same technology and have the same
bandwidth and amps would have to have roughly the same power capability
- under normal loads)

Seems to me you guys should be able to differentiate things like this 10
out of 10 times - especially if the price differences are a factor or so
more.
 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Arny Krueger and his two distortions Joe Sensor Pro Audio 125 June 6th 05 11:24 AM
Comments regarding: Cables, Hearing, Stuff!! lcw999 High End Audio 405 April 29th 04 01:27 AM
science vs. pseudo-science ludovic mirabel High End Audio 91 October 3rd 03 09:56 PM
Acoustically transparent but opaque material for blind speaker testing? Rich Andrews Tech 8 August 28th 03 10:30 PM
Acoustically transparent but opaque material for blind speaker testing? Per Stromgren General 0 August 19th 03 09:33 AM


All times are GMT +1. The time now is 08:45 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"