Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.pro
frz-man
 
Posts: n/a
Default Wanted microphone pieces

Looking to buy parts if anyone can recommend a supplier .... I need
condensor heads .. maybe electret .--- altho I don't know of good
quality ones --- to be used for lavaliers .. so omni patterns

...also looking for another Oktava MC012 with hypercardiod pattern

.... please send a private message
thanks

  #2   Report Post  
Posted to rec.audio.pro
Scott Dorsey
 
Posts: n/a
Default Wanted microphone pieces

frz-man wrote:
Looking to buy parts if anyone can recommend a supplier .... I need
condensor heads .. maybe electret .--- altho I don't know of good
quality ones --- to be used for lavaliers .. so omni patterns


Digi-Key carries various Panasonic and Knowles omni capsules.
Call 1-800-DIGI-KEY and ask for a catalogue.

..also looking for another Oktava MC012 with hypercardiod pattern


So, call the Sound Room, or Oktava USA and order it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #3   Report Post  
Posted to rec.audio.pro
frz-man
 
Posts: n/a
Default Wanted microphone pieces

I was looking for comparable capsules to Crown PZM .. such like

  #4   Report Post  
Posted to rec.audio.pro
Peter Larsen
 
Posts: n/a
Default Wanted microphone pieces

frz-man wrote:

I was looking for comparable capsules to Crown PZM .. such like


If you want a Crowm PZM, then buy one, if if you want to experiement
with building you own Scott already told you where to shop.


Kind regards

Peter Larsen

--
*******************************************
* My site is at: http://www.muyiovatki.dk *
*******************************************
  #5   Report Post  
Posted to rec.audio.pro
Scott Dorsey
 
Posts: n/a
Default Wanted microphone pieces

frz-man wrote:
I was looking for comparable capsules to Crown PZM .. such like


Actually, the Genex communications mikes capsules might be a reasonable
choice. Their omni rolls off around 8 KHz like the Crown capsules do.
That would make it a good choice for PZM mounting.

All of the Panasonic and Knowles capsules have much too good high end
extension for this sort of thing.

But I thought you wanted this to make lav mikes?
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."


  #6   Report Post  
Posted to rec.audio.pro
 
Posts: n/a
Default Wanted microphone pieces

"frz-man" writes:

Looking to buy parts if anyone can recommend a supplier .... I need
condensor heads .. maybe electret .--- altho I don't know of good
quality ones --- to be used for lavaliers .. so omni patterns

..also looking for another Oktava MC012 with hypercardiod pattern

... please send a private message
thanks


Join "micbuilders" on Yahoo groups. Lots of packrats and tinkerers there.
It is difficult to find bare condenser elements, at least aside from the
Panasonic types, but there are some sources.

Richard
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Note to Trevor Audio Opinions 9 November 7th 05 08:45 AM
FS: Pro Audio Gear, Parts, Accessories [email protected] Pro Audio 0 February 28th 05 04:51 PM
common mode rejection vs. crosstalk xy Pro Audio 385 December 29th 04 12:00 AM
Artists cut out the record biz [email protected] Pro Audio 64 July 9th 04 10:02 PM


All times are GMT +1. The time now is 04:08 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"