Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.high-end
Mark D
 
Posts: n/a
Default Tone Controls-EQ's, Etc.

Thank you Kalman,

I would imagine that some of the things that are most difficult to
attain, and common amongst most run of the mill home audio systems, and
listening enviorments, can be trying to attain proper
imaging-soundstage, and a clear coherent sound field.

I know my system lacks this attribute somewhat, as I'm limited by what I
can do within my own home.

Walls that reflect too much can smear, and "confuse-pollute"" the sound
of a system.

To be totally honest, I've only heard audio done "perfectly right" twice
in my entire life.

In one instance, it was IMO a properly sized room, (Was about 25'x50')
had the correct room treatments, had perfect speaker placement, and had
the sofa sitting in the perfect "sweet spot".

The components were all Audio Research, and the speakers were $5,300 a
pair Martin Logans.
Not that this has been the most expensive system I've ever heard mind
you, but I reckon time, and strict attention was paid to dialing in-fine
tuning everything.

I truly understood at that moment just how important speaker placement,
listener position, and room treatments-good acoustics were, rather than
add-ons like Tone Controls, EQ's, etc.

With eyes closed, the soundstage was huge, the walls magically
vanished-disappeared, and one could visualize the Orchestra in front of
you, will no readily audible sense of a back wall, or side walls causing
reflections. The Goose Bumps were there!
Mark
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yamaha C-6 preamplifier tone controls Engineer Tech 1 September 18th 04 01:43 AM
Issues bypassing tone controls. Did I screw up? Bryan McGivney Vacuum Tubes 4 February 13th 04 06:58 PM
DIY Amp - Tone controls update (semi-long). JamesG Vacuum Tubes 1 September 17th 03 07:12 PM
DIY AMP Tone controls don't work - help? JamesG Vacuum Tubes 4 September 11th 03 05:23 PM
Is it true you can't bypass the Behringer UB802's tone controls ? Jones_r Pro Audio 11 August 16th 03 12:47 PM


All times are GMT +1. The time now is 11:58 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"