On Thu, 20 Oct 2005 16:14:39 GMT, "
wrote:

"Signal" wrote in message
.. .
" emitted :

Krell 350 Watt monoblocks @ $17,500.00 per pair
350 watts wpc @ 8 Ohms
700 wpc @4 Ohms
1400 wpc @ 2 Ohms
Signal to noise = 118db 95 db @ 2.83 V
THD = .05% 20 Hz - 20 kHz
Input Impedance = 100 K Ohms
Input Sensitivity = 2.6v RMS for max power
Voltage gain = 26.4 db

---------------------------------------------------------------------------------
QSC PLX 3402 Stereo amp $1200.00
700 wpc @ 8 Ohms
1100 wpc @ 4 ohms
1700 wpc @ 2 ohms
Signal to noise 107 db
THD = .03% 20 Hz - 20 kHz
Input Impedance = 6 K ohms
Input sensitivity = 1.9 Volts @ 8 ohms
Voltage gain = 32 db

Where are the frequency response plots?


Why would you need them? Isn't it all about the sound?

So, how do they sound compared with each other?

I figure you get the QSC and either modify it by adding heat sinks or
replacing the fans with very quiet ones,
and still have saved around $15,000.00 and not be able to hear any
difference.

If you have a difference of opinion, please provide the technical reason
why
you disagree that would account for any differences in sound quality.

OK, so you want people to technically explain audible differences they
hear between amps they cannot possibly have compared. Very good!

Some people here seem to think all they have to do is listen and you can
make a judgement with just one listen and no comparison blind or otherwise.

And some people think that you don't even have to LISTEN at all.