Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hi,
I bought this USB2 audio card - I need it to do small demo of own material, I like the ADAT options because with an AD 8/8 interface I have the options of recording life drums. I'm not going to make any production on this unit, it's only for sketches. I CANNOT get this audio card to work. The driver installs fine, but after reboot the little Behringer util do not show up in the system tray. NO audio application can use the audio interface. I have followed the entire instruction available, concerning Windows configuration (driver, SP etc) I have tried on different motherboards, with different chipset, RAM and CPU, same error. The last response from Behringer was that the chipset on the USB2 card could be a problem. So I bought a new USB2 card with a NEC chipset, as Behringer specified. Still I cannot get it working. This is the current system setup (my third test computer): Motherboard : ASUS A7N8X E-Deluxe CPU : Athlon USB Card : SYBA NEC USB2.0 RAM : Kingston 512mb PC3200 DDR400 Driver : Software version: V1.9.7.2 beta Software : Im using Cubase and Traction I know that the Audio Card IS working, because it works ok on my IBM 600 MHz PIII laptop. (Except that I cannot use the Behringer ASIO output, but only the windows default ASIO, with a LOT of latency) Only problem is that this computer is to slow as a DAW. On which computer configuration, can you get the BCA2000 working? -- Karsten Ulrich Krambs Ba.Sc.Eng (hons) & Stud.Theol |
#2
![]() |
|||
|
|||
![]()
Karsten, I've both read and been told by Behringer support that you
need an Intel chipset. Athlon is not supported. I've also read somewhere that the BCA2000 manual states that you need Intel. /dminoz |
#3
![]() |
|||
|
|||
![]()
dminoz wrote:
Karsten, I've both read and been told by Behringer support that you need an Intel chipset. Athlon is not supported. . More shortsighted idiots who are tying to cut out like 50% of their support workload by arbitrarily abandoning like 50% of their customer base. I've also read somewhere that the BCA2000 manual states that you need Intel The BCA2000 manual is online at the Behringer web site. Text searching of the PDF reveals zero instances of the word intel. |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Behringer BCA2000 - Stability issues (ABIT KT7 (VIA chipset) + Athlon) | Pro Audio | |||
quick Q on speaker/channel troubleshooting... | Car Audio | |||
Troubleshooting help- Zenith Trans-Oceanic A600 tube radio | Vacuum Tubes | |||
Help with EAD DSP 7000 DAC troubleshooting | High End Audio | |||
Troubleshooting cassette tape transport mechanism | Tech |