Menu

makie cfx prob

Prev

Previous Post

Next Post

Next

#8

Report Post

Mike Rivers

Posts: n/a

Default

In article writes:

hi,why when I pull down the subfaders 1 and 2 on the mackie cfx 18 I hear
reverb..I've tried post abd pre on the channel strip amongst other settings
to no avail.is this solveable or is that how it is?

That's the way it is. Like all of the Mackie mixers, they designed the
CFX routing to do several things, and like all of the Mackie mixers,
it does some things better than others. The internal effects outputs go
directly to the L/R mix, bypassing the submasters.

What might work (and I haven't tried this) is to turn the EFX To Main
Mix control all the way down, then connect a patch cable (or two, if
stereo effects is important) from the Stereo EFX RETURN 2 jack(s) to
the line input(s) of a spare channel or pair of channels. Then assign
those channels to subs 1-2 and your effects will follow those
submasters.

I'm looking at a block diagram, and this looks like it should work but
there might be normalling switches on the EFX Return jacks that get in
the way.

--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo

Reply With Quote

Reply With Quote

Thread Tools
Show Printable Version
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Receiver Prob - Loose left channel at low volume	Jeff	Tech	78	December 15th 03 04:22 PM
Makie 1202 with ADAT	RussellC301	Pro Audio	1	July 1st 03 07:15 PM

All times are GMT +1. The time now is 11:46 AM.

About Us

"It's about Audio and hi-fi"

Contact Us AudioBanter Home Privacy Statement