hank alrich wrote:
Nudge wrote:

I am confused. How do you listen to something _in the digital domain_?
Do you have DAC's built into your head? I have to listen in the analog
domain because I don't have digital ears.

So please articulate more clearly the actual circumstances and attendant
signal routing for when you do hear it and for when you do not hear it.


My dbx 386 mic pre has S/PDIF out as well as analog out.
I can take the analog output and go into my A/D card
(Terratec EWS 88MT). This way the problem doesn't occur.

But if I connect the S/PDIF output of the mic pre
with the S/PDIF in of the A/D card, I hear that noise.

Of course, I listen to a analog signal that goes through
the EWS88MT D/A again into my mixer and headphones. ;-)

Kind Regards
Nudge

--
Nudge // PCS Records Studio Leipzig
http://studio.lieber-media.de

In article writes:

My dbx 386 mic pre has S/PDIF out as well as analog out.
I can take the analog output and go into my A/D card
(Terratec EWS 88MT). This way the problem doesn't occur.

But if I connect the S/PDIF output of the mic pre
with the S/PDIF in of the A/D card, I hear that noise.

So you're always monitoring the analog output of the Terratec card,
sometimes fed from its analog input, sometimes fed from the digital
input. But the examples you've been posting have all been recorded
through the same path, so it's not surprising that they sound OK
(since they sound OK under some conditions at your studio). If you
wanted to illustrate what happens when you monitor the digital output
of your preamp through the D/A converter in your sound card, you'd
have to re-record the analog output of your sound card.

Given the situation, I'd say you have a clocking problem. Check the
Terratec driver control panel and, when you're using the digital
input, make sure it's getting its word clock from the digital input,
and not the internal clock. I'll bet that's your problem.


--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo

"Mike Rivers" wrote in message
news:znr1103027291k@trad...

In article writes:

My dbx 386 mic pre has S/PDIF out as well as analog out.
I can take the analog output and go into my A/D card
(Terratec EWS 88MT). This way the problem doesn't occur.

But if I connect the S/PDIF output of the mic pre
with the S/PDIF in of the A/D card, I hear that noise.

So you're always monitoring the analog output of the Terratec card,
sometimes fed from its analog input, sometimes fed from the digital
input. But the examples you've been posting have all been recorded
through the same path, so it's not surprising that they sound OK
(since they sound OK under some conditions at your studio). If you
wanted to illustrate what happens when you monitor the digital output
of your preamp through the D/A converter in your sound card, you'd
have to re-record the analog output of your sound card.

Given the situation, I'd say you have a clocking problem. Check the
Terratec driver control panel and, when you're using the digital
input, make sure it's getting its word clock from the digital input,
and not the internal clock. I'll bet that's your problem.

Or the A/D on the 386 just sounds bad.

I missed the beginning of this thread, so I don't know what the specific
problem is supposed to be but that clip does sound shrill (aside from the
guitar being out of tune) in a way that reminds me of a blackface ADAT.

-jw

Mike Rivers wrote:
In article writes:


My dbx 386 mic pre has S/PDIF out as well as analog out.
I can take the analog output and go into my A/D card
(Terratec EWS 88MT). This way the problem doesn't occur.

But if I connect the S/PDIF output of the mic pre
with the S/PDIF in of the A/D card, I hear that noise.

Given the situation, I'd say you have a clocking problem. Check the
Terratec driver control panel and, when you're using the digital
input, make sure it's getting its word clock from the digital input,
and not the internal clock. I'll bet that's your problem.

Thank everybody for the hints.
I will check the clocking next.

Kind Regards
Nudge

--
Nudge // PCS Records Studio Leipzig
http://studio.lieber-media.de

Nudge wrote:

My dbx 386 mic pre has S/PDIF out as well as analog out.
I can take the analog output and go into my A/D card
(Terratec EWS 88MT). This way the problem doesn't occur.

But if I connect the S/PDIF output of the mic pre
with the S/PDIF in of the A/D card, I hear that noise.

That could well be a clocking issue. Re-examine how you've set the
devices when going the digital route.

Of course, I listen to a analog signal that goes through
the EWS88MT D/A again into my mixer and headphones. ;-)

Good. g

--
ha