Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
George Gleason
 
Posts: n/a
Default

GaryMedia wrote:
I have an Alesis Studio 32 mixer that makes a "seashore" noise in the
right outputs of both subgroups and in the main output. The source of
the noise in channel-11, and it's there regardless of the position of
the mute and pan controls for that channel.

To further describe the "seashore" noise, its a hissy, static-y (like AM
radios during a thunderstorm) sound with occasional deeper rumbles.

Although the problem has also surfaced on channel-6, it's most
reproducable in channel-11. It will start a few minutes after the mixer
is turned on, then will quiet down for hours at a time before
re-occuring. No signal needs to be present on any channel for this
problem to manifest.

Before I open this thing (or send it out for repair), I'd like to have
some idea of what components are the likely culprits.

Any ideas?



If you decide on a low cost replacment I have two Behringer 3242's for
sale perfect condition 350.00
george

 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
common mode rejection vs. crosstalk xy Pro Audio 385 December 29th 04 12:00 AM
Artists cut out the record biz [email protected] Pro Audio 64 July 9th 04 10:02 PM


All times are GMT +1. The time now is 05:25 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"