Reply
 
Thread Tools Display Modes
  #41   Report Post  
David Morgan \(MAMS\)
 
Posts: n/a
Default


"Roger W. Norman" wrote in message...

Mr. Sadler is always a good person to keep in mind.



Scott, Mike...

Boucoup thanks, muchas gracias, etcetera.... Steve will be walking
me through the tension adjustments by phone later this evening.


--
David Morgan (MAMS)
http://www.m-a-m-s DOT com
Morgan Audio Media Service
Dallas, Texas (214) 662-9901
_______________________________________
http://www.artisan-recordingstudio.com




  #42   Report Post  
David Morgan \(MAMS\)
 
Posts: n/a
Default


Roger,

Thanks again for the gentlemanly slap in the face earlier... Between you
three guys I remembered this 2" thing isn't just a cake walk.

DM


  #43   Report Post  
David Morgan \(MAMS\)
 
Posts: n/a
Default


Roger,

Thanks again for the gentlemanly slap in the face earlier... Between you
three guys I remembered this 2" thing isn't just a cake walk.

DM


  #44   Report Post  
Roger W. Norman
 
Posts: n/a
Default

Hope the tensioning resolves some of your problems. You know, you could let
us know how it's going! g

--


Roger W. Norman
SirMusic Studio

"David Morgan (MAMS)" wrote in message
news:OzC8d.8554$1g5.2052@trnddc07...

Roger,

Thanks again for the gentlemanly slap in the face earlier... Between you
three guys I remembered this 2" thing isn't just a cake walk.

DM




  #45   Report Post  
David Morgan \(MAMS\)
 
Posts: n/a
Default


"Roger W. Norman" wrote in message ...

Hope the tensioning resolves some of your problems. You know, you could let
us know how it's going! g



Thank heaven that the producer has returned home, because the overdub sessions
are at a standstill. The first attempt at the torque and tension adjustments stayed
fast for about 2 hours, then began to drift again. The machine is either dumping
tape from the supply side and dropping out of record, or creeping while in stop
and refusing to enter play. I'm going over it again by phone with Mr. Sadler later
this afternoon. I'll let ya' know...

I'm gonna' post some pictures of the 7-day conversion from a house to a workable
recording environment a little later.


--
David Morgan (MAMS)
http://www.m-a-m-s DOT com
Morgan Audio Media Service
Dallas, Texas (214) 662-9901
_______________________________________
http://www.artisan-recordingstudio.com


Roger W. Norman
SirMusic Studio

"David Morgan (MAMS)" wrote in message
news:OzC8d.8554$1g5.2052@trnddc07...

Roger,

Thanks again for the gentlemanly slap in the face earlier... Between you
three guys I remembered this 2" thing isn't just a cake walk.

DM






Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Siemens Recal Sheet Mike Caffrey Pro Audio 2 September 28th 04 11:07 PM
Siemens Recal Sheet Mike Caffrey Pro Audio 0 September 28th 04 08:53 PM


All times are GMT +1. The time now is 06:14 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"