Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I swapped out a few hours time at a friend's studio so I brought my meager
rig(PC/001 & Nuendo) with me to experiment sending out stereo busses to his board & goof around with that...no summing in or out flamewars - just wanted to try it. I sent out 4 stereo analog pairs & tried to send out 4 pair from the ADAT/Litepipe thingy. We were sending that into that TDIF/Litepipe converter box into an armed DA 88 out into the board. Didn't have much luck with that. I matched up the 44/16ness of it all and we could hear it & see it on the board but it was going on & off....clock issue perhaps, I have no idea what the problem was - operator error no doubt. I abandoned that quick & went back to the 4 stereo analog pairs out. I was curious if Lightpipe & the analog outs arrive at the same time. Bottomline, even though it was a Mackie 32/8 I definitley do enjoy pushing faders - when you crank the vocals up - it cranks without distorting....the headroom issue perhaps, I dunno. I did a bunch of little experiments, nothing scientific so I don't know if it sounds wider or not. I'm thinking it might. I know 3d audios CD is supposed to dispell the myth yet lots of people doing it. |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Mixing gtrs onstage and sending a sum to foh | Pro Audio | |||
Mixing gtrs onstage and sending a sum to foh | Pro Audio | |||
bridging a 4channel to 1 or sending 2 channels of power to one mono source? | Car Audio | |||
Sending it out to the house: EQ then compressor or vice versa? | Pro Audio |