Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]() This is NOT an auction announcement! FS: Bundle of Ramsa DA-7 cards. Sold as a bundle only, I'm not interested in piecing these out. Priced to move. My Ramsa DA-7 died. I sold it for parts, but kept all the cards in anticipation of getting another one, but have decided I probably won't do this. So I have seven (7) cards for the DA-7 to sell: two (2) WR-ADDA 8-channel analog in/out cards. These were in the machine, and are therefore "pre-owned". Tough to find! one (1) WR-AESS AES/EBU card. This one is also "pre-owned" one (1) WR-SMPT SMPTE card. This is BRAND NEW IN A SEALED BOX. three (3) WR-TDIF cards. Two of these are BRAND NEW IN SEALED BOXES, and one I bought "pre-owned" off of the net. In addition to these, I'll throw in: A copy of the DA7 Owner's Manual A DA7 meter bridge with mounting brackets A few knobs, slider caps, and screws that I kept off of the old console to use with the next one (had I bought one). A meter bridge as a "throw-in" you ask? Yes. It worked fine (as of the last my board worked) but the case is missing some plastic off of the bottom and the front has some scratches on it. I picked it up cheaply and didn't care about the cosmetics. So, because it is a "throw-in", no complaints about the condition please! I'm telling you up front about it! I don't want any of this stuff back, so it is all sold AS-IS. The "pre-owned" stuff worked as of last I know, that's the best I can do. $600 plus shipping/insurance from Pittsburgh, PA for the whole kit-and- kaboodle. This is a pretty good deal, especially if you have a basic, stripped DA-7 that you want to make *really* flexible. --Tom |
Reply |
Thread Tools | |
Display Modes | |
|
|