Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have two of these 1/2" 8 tracks sitting here. One works perfectly,
has the vari-speed motor, and external DBX encoder/decoder, was modded by someone for 2 output fans on top of the unit. Been sitting in storage for 4 years, a lil cramolin on the relays and you'd be set. B/O The other unit, plays back but will not record. The oscillator circuit is damaged and I could not get the same exact transistors (read japanese 1970's) so the bias could not be achieve for recording. B/O Both of these units weigh 75lbs each. Available for pickup in Lancaster, Pa Bill Rampage Sound Studios Lancaster, Pa |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
How do I get MMC/MTC/SMPTE between Sonar, Tascam 1884, and an ADAT? | Pro Audio | |||
What happen to the TASCAM on-line forums??? | Pro Audio | |||
FS: Studio Liquidation | Marketplace | |||
FS: Studio Liquidation | Marketplace | |||
audio stutter w/laptop and Tascam US428 | Pro Audio |