Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hello, i have these settings:
Left 8 ohm, Right 8 ohm }Speakers Left 4 ohm, Right 4 ohm }Speakers NAD 3130 XBOX When i have the volume at low sound it doesent come any sound to the two right speakers. Ofcourse i wonder why, and what can i do about it? Greetings, Adam |
#2
![]() |
|||
|
|||
![]()
This may be from a cold solder connection especially in the output stage. If
your model uses a protection relay, the contacts may be going bad, or may be oxidized. Take care that the specs for your amp are rated for 4 ohms. Many of these amps are 8 ohm only, and the output stage will overheat when using 4 ohm speakers. Overheating the output stage, can lead to some very expensive problems to deal with. -- Jerry G. ========================== "Alj" wrote in message om... Hello, i have these settings: Left 8 ohm, Right 8 ohm }Speakers Left 4 ohm, Right 4 ohm }Speakers NAD 3130 XBOX When i have the volume at low sound it doesent come any sound to the two right speakers. Ofcourse i wonder why, and what can i do about it? Greetings, Adam |
#3
![]() |
|||
|
|||
![]()
"Jerry G." wrote in message ...
This may be from a cold solder connection especially in the output stage. If your model uses a protection relay, the contacts may be going bad, or may be oxidized. Take care that the specs for your amp are rated for 4 ohms. Many of these amps are 8 ohm only, and the output stage will overheat when using 4 ohm speakers. Overheating the output stage, can lead to some very expensive problems to deal with. -- Jerry G. ========================== "Alj" wrote in message om... Hello, i have these settings: Left 8 ohm, Right 8 ohm }Speakers Left 4 ohm, Right 4 ohm }Speakers NAD 3130 XBOX When i have the volume at low sound it doesent come any sound to the two right speakers. Ofcourse i wonder why, and what can i do about it? Greetings, Adam Okey, i will check that about oxidation, but are you sure that i may ruin my amp if i use those settings? The Amp has a switch that lets you choose betwen 8ohm and 4ohm, what should i then use, i have as i said 2 8ohm speakers and 2 4ohm speakers. |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
dvd technical problems | Tech | |||
Anyone Else Just Get An 828mkII? Having Problems? | Pro Audio |