| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
Sugden A28 II Servicing info requested
Does anyone know what the quiescent current should be and whether
there is a specific point in the board that it can be measured. The simplest way seems to be lifting the individual fuse for the channel and putting an ampmeter in its place. But, if anyone knows the correct procedure It would be appreciated. Thanks. |
|
#2
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Try the manufacturer:
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 John wrote in message ... Does anyone know what the quiescent current should be and whether there is a specific point in the board that it can be measured. The simplest way seems to be lifting the individual fuse for the channel and putting an ampmeter in its place. But, if anyone knows the correct procedure It would be appreciated. Thanks. |
|
#3
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Try the manufacturer:
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 John wrote in message ... Does anyone know what the quiescent current should be and whether there is a specific point in the board that it can be measured. The simplest way seems to be lifting the individual fuse for the channel and putting an ampmeter in its place. But, if anyone knows the correct procedure It would be appreciated. Thanks. |
|
#4
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Try the manufacturer:
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 John wrote in message ... Does anyone know what the quiescent current should be and whether there is a specific point in the board that it can be measured. The simplest way seems to be lifting the individual fuse for the channel and putting an ampmeter in its place. But, if anyone knows the correct procedure It would be appreciated. Thanks. |
|
#5
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Try the manufacturer:
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 John wrote in message ... Does anyone know what the quiescent current should be and whether there is a specific point in the board that it can be measured. The simplest way seems to be lifting the individual fuse for the channel and putting an ampmeter in its place. But, if anyone knows the correct procedure It would be appreciated. Thanks. |
|
#6
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Have you asked the manufacturers?
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 |
|
#7
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Have you asked the manufacturers?
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 |
|
#8
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Have you asked the manufacturers?
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 |
|
#9
|
|||
|
|||
|
Sugden A28 II Servicing info requested
Have you asked the manufacturers?
J.E Sugden & Co.Ltd Valley Works, Station Lane Heckmondwike West Yorkshire WF16 0NF Tel: 01924 404088 |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wanted: INFO or Schematic for BIRCH SP 656 Phonograph | Tech | |||
| Is all audio literature shallow? Where is the IN-DEPTH info? | Pro Audio | |||
| WANTED: INFO, SCHEMATIC OR 10" WOOFERS for JENSEN TF-3 SPEAKERS | Pro Audio | |||
| Need Info: Utah Celesta 12" Triaxial Speakers ??? | Tech | |||
Linear Mode
