Hi,

We've got an Otari Status with no channel screws in it. I believe they are
American stylee screws but I must confess I know next to nothing about this
type. If there's no M infront then I haven't got a clue. So yeah, if anyone
out there with a Status can enlighten me as to what screw dimensions I need
I would be eternally grateful. Even better, if you know a source for them in
the UK I'll be gratful for even longer.

Thanks

Ollie

Contact OTARI.

I don't know if these are current, but he



UK:

5 The Chase Centre, Chase Road
Phone: +44-20-8963-4790, Fax: +44-20-8963-4799
Web Site: www.stirlingsyco.com
E-mail:
Contact: Garry Robson

USA:

8236 Remmet Avenue, Canoga Park, CA 91304 U.S.A.
Phone : (800) 877-0577 (In U.S.) or 1/818-598-1200 (Outside U.S.)
Fax: (800) 300-3055 (In U.S.) or 1/818-594-7208 (Outside U.S.)
E-mail:
Sales & Marketing Department:
Service Department:
Parts Department:



Ollie wrote:
Hi,

We've got an Otari Status with no channel screws in it. I believe they are
American stylee screws but I must confess I know next to nothing about this
type. If there's no M infront then I haven't got a clue. So yeah, if anyone
out there with a Status can enlighten me as to what screw dimensions I need
I would be eternally grateful. Even better, if you know a source for them in
the UK I'll be gratful for even longer.

Thanks

Ollie

In article , Ollie
wrote:

Hi,

We've got an Otari Status with no channel screws in it. I believe they are
American stylee screws but I must confess I know next to nothing about this
type. If there's no M infront then I haven't got a clue. So yeah, if anyone
out there with a Status can enlighten me as to what screw dimensions I need
I would be eternally grateful. Even better, if you know a source for them in
the UK I'll be gratful for even longer.

Thanks

Ollie



If you have the service manual take a look at the schematics, it should
be listed there.




David Correia
Celebration Sound
Warren, Rhode Island


www.CelebrationSound.com

Thanks for the replies. I tried Otari (who haven't got back to me) and
Stirling (who didn't know), but I reckon they're probably 4-40 screws. I
found several references to these in the manual, although couldn't find an
actual reference to the particular screw in question. Now the only problem
will be getting them in black counter-sunk. I feel a trawl through the
internet coming on.

Thanks again
Ollie

Ollie wrote:
Thanks for the replies. I tried Otari (who haven't got back to me) and
Stirling (who didn't know), but I reckon they're probably 4-40 screws. I
found several references to these in the manual, although couldn't find an
actual reference to the particular screw in question. Now the only problem
will be getting them in black counter-sunk. I feel a trawl through the
internet coming on.

Look in the yellow pages under "Fasteners" and you should find some local
industrial fastening place which will have them. If you come up totally
dry, let me know and I'll drop a couple in an envelope.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

In article writes:

Thanks for the replies. I tried Otari (who haven't got back to me) and
Stirling (who didn't know), but I reckon they're probably 4-40 screws. I
found several references to these in the manual, although couldn't find an
actual reference to the particular screw in question.

So go to Home Depot, buy a 4-40 screw (or box of 25) of any
description, and see if it fits the thread. If it does, then all you
need to do is find 4-40 screws in the right length, color, and head
style. If it doesn't, then start looking for metric sizes, probably
2.5 mm.




--
I'm really Mike Rivers - )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo

Tell me how many you need and I'll get 'em for you.
I'll be going there in the week after next.


Ollie wrote:
Thanks for the replies. I tried Otari (who haven't got back to me) and
Stirling (who didn't know), but I reckon they're probably 4-40 screws. I
found several references to these in the manual, although couldn't find an
actual reference to the particular screw in question. Now the only problem
will be getting them in black counter-sunk. I feel a trawl through the
internet coming on.

Thanks again
Ollie

Thanks very much for the offer Bryson. I have just ordered some screws
yesterday though, so I think I'm OK for this. Thanks for offering though.

Cheers

Ollie

"Bryson" wrote in message
...
Tell me how many you need and I'll get 'em for you.
I'll be going there in the week after next.


Ollie wrote:
Thanks for the replies. I tried Otari (who haven't got back to me) and
Stirling (who didn't know), but I reckon they're probably 4-40 screws. I
found several references to these in the manual, although couldn't find
an
actual reference to the particular screw in question. Now the only
problem
will be getting them in black counter-sunk. I feel a trawl through the
internet coming on.

Thanks again
Ollie