Home |
Search |
Today's Posts |
#19
![]()
Posted to rec.audio.pro
|
|||
|
|||
![]()
geoff wrote:
On 26/04/2020 12:57 am, Scott Dorsey wrote: 5ms may be good enough - best try it out. Quite inexpensive .... Most regular analogue IEM system could do similar, in stereo if desired, without the latency. If you're going to put the live feed into the mix, latency on the headphone is critical for tracking. 5ms is enough to cause weird comb filtering on the vocals in the phones. How ya going to get 5ms latency ( or 1ms for that matter) in an analogue wireless link ? With analogue links, latency is not an issue, but then you get a whole bunch of other problems in return. Whatever happened to those infrared headphone links? I still have one around somewhere that uses a 1 MHz carrier and an IR LED. Fidelity is just so-so but would be fine for tracking. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
In-ear phones | Pro Audio | |||
in-ear phones | Audio Opinions | |||
IR wireless h'phones picking up radio station!? | Tech | |||
GET FREE CELL PHONES and CAMERA PHONES! | Pro Audio | |||
Req: Suggestions for Wireless Mic & Wireless In-Ear rack set-up | Pro Audio |