Home |
Search |
Today's Posts |
#23
![]()
Posted to rec.audio.high-end
|
|||
|
|||
![]()
On 22/02/2020 7:48 am, Peter Wieck wrote:
On Friday, February 21, 2020 at 3:36:32 PM UTC-5, Trevor Wilson wrote: **Why? XLRs are very good connectors. They're robust, easy to wire up and earth makes first and breaks last. Adapters are easy to source. Because: The system in question is a home audio system. **Irrelevant. XLRs are VERY common in higher end domestic systems. XLRs are an entirely appropriate connector and inexpensive. The system in question is quite vintage, using RCA jacks exclusively. **Sure. Most are. However, 2 female and 2 male XLR connectors/adapters are not a crazy idea. The individual asking for suggestions is of limited means, physically and, likely, financially. **Possibly. Which is why I pointed to an eBay sale. The Behringer is a cheap option and, IME, cheaper than a quality, analogue, paramtetric EQ. Either way, I already provided the most suitable solution, which could cost almost nothing - room treatments. Room treatements will almost certainly solve the problem. The individual in question may have to move on short notice. **Irrelevant. XLRs can be disconnected and re-connected as rapidly as RCAs. Adapters may be easy to source, but that does not make the cost of the equalizer together with the four (4) adapter needed cheap. **Sure. However, a standard 10 band EQ is almost a waste of time. At the very minimum, a parametric EQ is the only item worth bothering with. Parametric (analogue) EQs tend to be expensive, unless one is looking for a digital parametric EQ. I related a story about an ancient, analogue parametric I recently bought and re-sold for a substantial sum. A second hand Behringer can be a much cheaper option. And one that has some significant advantages. That said, I will stand by my original suggestion - room treatments are the best option. They can be cheap, effective and easily removable. Generally, when giving advice, it is both courteous and common sense to make the suggestions fit the conditions at hand, and not add needless levels of complexity. **I agree. Room treatments will be, by a long margin, the best option. -- Trevor Wilson www.rageaudio.com.au |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Attenuate -10db output | Pro Audio | |||
Best Way to Attenuate | Vacuum Tubes | |||
Attenuate or run hot mic directly into A/D convertor? | Pro Audio | |||
any way to attenuate tweeters on coaxials? | Car Audio | |||
Can my GPS attenuate sound on stereo?? | Car Audio |