| Home |
| Search |
| Today's Posts |
|
#1
Posted to rec.audio.pro
|
|||
|
|||
Tascam MX-2424 problem
No ouput on channels 1-8. All other channels fine. The audio in/out
board was totally recapped about a year ago but I did not test the machine after I got it back. All interior connection are fine but there is a row of status LED's labelled "XIL DeBug." The one in the middle (designated D21 or D22 - hard to tell) is red while all others are green. Anyone here know what this means? RR |
|
#2
Posted to rec.audio.pro
|
|||
|
|||
|
Tascam MX-2424 problem
On Wed, 31 Oct 2018 18:33:32 +0000 (UTC), Rick Ruskin
wrote: P.S. - These lights are on the motherboard. No ouput on channels 1-8. All other channels fine. The audio in/out board was totally recapped about a year ago but I did not test the machine after I got it back. All interior connection are fine but there is a row of status LED's labelled "XIL DeBug." The one in the middle (designated D21 or D22 - hard to tell) is red while all others are green. Anyone here know what this means? RR |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tascam MX-2424 software stability | Pro Audio | |||
| FS/TRADE Tascam IF-TD24 (TDIF I/O for MX-2424) | Pro Audio | |||
| FS/TRADE Tascam RC-2424 for IF-AN24 - Atlanta, GA | Pro Audio | |||
| Tascam MX-2424 Ram | Pro Audio | |||
| Tascam MX-2424 MXView Editor for OSX ??? | Pro Audio | |||
Linear Mode
