Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default Ampex ATR100 repair

Gareth Magennis wrote:
Good call, Scott, the heads have been replaced.
The connector for the Sel Sync coils is hanging in mid air.

Can you tell from the photo what these heads might be?

http://tinypic.com/r/111qs6h/9


The big Flux Magnetics logo on top is a giveaway. If you call JRF, John
will probably know the complete history of that machine.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FA: Ampex 300/351/351 , MM1000 and ATR100 parts Steve Puntolillo Pro Audio 0 March 19th 04 08:42 AM
FA: Ampex 300/351/351 , MM1000 and ATR100 parts Steve Puntolillo Marketplace 0 March 19th 04 08:42 AM
FA: Ampex 300/351/351 , MM1000 and ATR100 parts Steve Puntolillo Marketplace 0 March 18th 04 05:44 AM
FA: Ampex / ATR Services ATR100 I/O Modules Steve Puntolillo Pro Audio 0 March 17th 04 05:46 AM
FS: Ampex Tube 351 2-ch & Ampex 300 mono... Tape deck MTM Vacuum Tubes 0 September 16th 03 05:52 PM


All times are GMT +1. The time now is 04:41 PM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"