Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #30   Report Post  
Lou
 
Posts: n/a
Default Is the high end a hoax?

They have letters from men, they are engineers. I know not if they are
"registered" what ever that means. Not much emphasis seems to be placed upon
analogue these days in the schools, or at least that is what they tell me.

" No, you misunderstand the basics here, as the *impedance* of the load
will vary dramatically in the bass region, thereby affecting how much
power is required for a given SPL. It is therefore a moot point
whether the load will require more amps or more volts at any
particular frequency."


Someone sure is misunderstanding someone here... If you claim that an IC
gives you more bass, sure you can compare the current in the 2 ICs, but the
only way to know would be to filter out the low frequencies where it is said
they are hearing more bass, and see if there is in fact more current flow
there.


--
Best Regards,

Lou
"Stewart Pinkerton" wrote in message
...
On 16 Nov 2003 17:53:02 GMT, "Lou" wrote:

Voltage is determined by the amp, though the load can cause a drop in the
voltage it should not be much of one. The current depends not upon the

amp,
but the load, if the speakers want more current to move a lower

frequency,
due to further excursion of the driver, then it will demand more current,
though not more voltage as it cannot demand voltage, from the source.


No, you misunderstand the basics here, as the *impedance* of the load
will vary dramatically in the bass region, thereby affecting how much
power is required for a given SPL. It is therefore a moot point
whether the load will require more amps or more volts at any
particular frequency.

I work
with a LOT of EE types, it does not mean they understand electronics, the
ones I work with know PLC's, 4-20 loops PID loops, etc, but not

electronics.
That is why I often find myself correcting them on this very issue. It is
not that they are stupid, it is just that this is not their area of
expertise.


Excuse me, but if they are registered professional *engineers*, they
certainly *should* know electronics. You seem to be describing C&I
technicians, which is a different matter entirely.
--

Stewart Pinkerton | Music is Art - Audio is Engineering




 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
High Pass Filtering - How Audible? Arny Krueger Audio Opinions 36 April 22nd 04 08:10 PM
Unobtrusive, high quality speakers for stereo only? Reid Kaplan Audio Opinions 2 January 29th 04 03:25 PM
Direct Connect Hub With Only High Quality MP3s? Uber Audio Opinions 0 January 19th 04 09:10 PM
High end sound from computer Tim in Los Angeles High End Audio 36 November 2nd 03 07:55 AM
What is so high end about high end? Dennis Moore High End Audio 59 September 15th 03 03:00 AM


All times are GMT +1. The time now is 03:39 PM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"