Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default Pultec EQP clone problem

On Sat, 27 Feb 2021 04:31:33 -0800 (PST), "
wrote:

Nothing to do with the frequency of the wave or its harmonics. Each
ringing event is separate and is triggered by the broadband energy of
the rising or falling edge.


** Gobbledegook.


Don't be so hasty. I know this is not instantly intuitive, but it is
exactly what happens.


The frequency of the ring is determined by
the LC circuit that is being struck by that edge.


** So a linear circuit with a resonance creates a new frequency ?

No. If you do an FFT on an edge, you will find a broad spectrum, not a
discrete one. THere will be energy at whatever frequency the resonant
circuit causing the ringing works at.

Does not do so with a sine sweep.


If you do a sine sweep you will find the resonant frequency of the
ring. That is the frequency you will see when you strike it with a
fast rising edge. Think of it like a bell. If you keep hitting it, you
will hear the individual strikes, but the frequency that comes out
will be that of the bell, and nothing to do with how quickly you hit
it.

d

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dachman Audio U87 Clone Kit Paul Dorman Pro Audio 82 January 5th 21 02:50 AM
Good amps to clone Bret L Vacuum Tubes 0 April 25th 10 12:35 AM
WTB Waves Q-Clone License Haolemon Pro Audio 1 September 16th 07 08:26 AM
The clone marching on [email protected] Audio Opinions 5 August 23rd 07 05:23 AM
N72 1272 clone Studio Froombosch Pro Audio 0 March 31st 04 01:52 PM


All times are GMT +1. The time now is 08:37 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"