[thepaulthomas]

I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

[Scott Dorsey]

thepaulthomas wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

I don't think you can. I think there is only one control channel in
there. It won't just be a matter of cutting some traces, you'd have
to add more control logic.

If you want two mono program compressors, this is probably not the way to
go about it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[thepaulthomas]

On Dec 30, 10:22 am, (Scott Dorsey) wrote:
thepaulthomas wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

I don't think you can. I think there is only one control channel in
there. It won't just be a matter of cutting some traces, you'd have
to add more control logic.

If you want two mono program compressors, this is probably not the way to
go about it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Thank you, Scott. I already have one and just thought it would be
handy to have dual mono capability if if was as simple as moving an
internal jumper or cutting a trace on the board. The 320A does dual
mono but they also cost a lot more. ;-)

[David Morgan \(MAMS\)]

"thepaulthomas" wrote in message
...
On Dec 30, 10:22 am, (Scott Dorsey) wrote:
thepaulthomas wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

I don't think you can. I think there is only one control channel in
there. It won't just be a matter of cutting some traces, you'd have
to add more control logic.

If you want two mono program compressors, this is probably not the way to
go about it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Thank you, Scott. I already have one and just thought it would be
handy to have dual mono capability if if was as simple as moving an
internal jumper or cutting a trace on the board. The 320A does dual
mono but they also cost a lot more. ;-)

You can probably find one on e-bay in the area of $400 to $600 if you
take a little time shopping.

DM

[Ty Ford]

On Sun, 30 Dec 2007 14:36:00 -0500, David Morgan \(MAMS\) wrote
(in article AqSdj.4094$ZI4.2282@trnddc08):


"thepaulthomas" wrote in message
...
On Dec 30, 10:22 am, (Scott Dorsey) wrote:
thepaulthomas wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

I don't think you can. I think there is only one control channel in
there. It won't just be a matter of cutting some traces, you'd have
to add more control logic.

If you want two mono program compressors, this is probably not the way to
go about it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Thank you, Scott. I already have one and just thought it would be
handy to have dual mono capability if if was as simple as moving an
internal jumper or cutting a trace on the board. The 320A does dual
mono but they also cost a lot more. ;-)

You can probably find one on e-bay in the area of $400 to $600 if you
take a little time shopping.

DM

I have a 320. not a 320a, but it splits.

Regards,

Ty Ford



--Audio Equipment Reviews Audio Production Services
Acting and Voiceover Demos http://www.tyford.com
Guitar player?:http://www.youtube.com/watch?v=4RZJ9MptZmU

[[email protected]]

On Dec 30, 9:59*am, thepaulthomas
wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

It can be done. It's not switchable, but it is a standard mod shown in
the manual. Contact Aphex in Sun Valley and they will give you the
info.

Jim Williams
Audio Upgrades

[David Morgan \(MAMS\)]

wrote in message ...
On Dec 30, 9:59 am, thepaulthomas
wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.



It can be done. It's not switchable, but it is a standard mod shown in
the manual. Contact Aphex in Sun Valley and they will give you the
info.

Jim Williams
Audio Upgrades



There's a possibility Jim, that since the 300 hasn't been 'supported' in
several years, one might not get a swift answer in this case. If it is in
the original manual, however, one just might get a copy of that from
the Aphex archives. (I never realized the mod was even possible).

Aphex Systems
11068 Randall St.
Sun Valley, CA. 91352

Phone: (818) 767-2929

Wayne La Farr



Cheers,

--
David Morgan (MAMS)
Morgan Audio Media Service
http://www.m-a-m-s DOT com
Dallas, Texas (214) 662-9901
_____________________________
http://www.januarysound.com

[thepaulthomas]

On Dec 31, 6:45 am, wrote:
On Dec 30, 9:59 am, thepaulthomas

wrote:
I'm was hoping to find a manual and schematic for the discontinued
Model 300 Compellor but Aphex no longer has copies available. Does
anyone here know if there's a relatively easy way to bypass the
internal linking of the two channels? The old model 300 only worked in
stereo mode and did not have a front panel switch for dual mono. Any
help or insight would be greatly appreciated. Thanks.

It can be done. It's not switchable, but it is a standard mod shown in
the manual. Contact Aphex in Sun Valley and they will give you the
info.

Jim Williams
Audio Upgrades

Thank, Jim!
-Paul