Reply
 
Thread Tools Display Modes
  #1   Report Post  
Blake
 
Posts: n/a
Default Acoustic Guitar Signal Chain

Looking for feedback (pardon the pun)on current signal chains for
acoustic guitar amplification. I am about to take delivery of a new
Taylor with an expression system and a Talyor K-4 equilizer. This will
feed an acoustic amp (Crate 60 which I will upgrade at some point) with
reverb and chorus. Any thoughts on other options to add to the chain,
my goal is clean rich full sound that accentuates altered tunings such
as DADGAD might fool around with more processed sounds a little as an
alternative. I will also run a tuner off the K-4. I have been searching
for threads and articles on the internet but most are a few years old
nad seem somewhat dated. I want to augment the Taylor signal chain only
if it makes sense I know it is fine by itself but enjoy looking to make
it as good and flexible as possible.

  #2   Report Post  
Lawrence Lucier
 
Posts: n/a
Default

Blake wrote:
Looking for feedback (pardon the pun)on current signal chains for
acoustic guitar amplification. I am about to take delivery of a new
Taylor with an expression system and a Talyor K-4 equilizer. This will
feed an acoustic amp (Crate 60 which I will upgrade at some point) with
reverb and chorus. Any thoughts on other options to add to the chain,
my goal is clean rich full sound that accentuates altered tunings such
as DADGAD might fool around with more processed sounds a little as an
alternative. I will also run a tuner off the K-4. I have been searching
for threads and articles on the internet but most are a few years old
nad seem somewhat dated. I want to augment the Taylor signal chain only
if it makes sense I know it is fine by itself but enjoy looking to make
it as good and flexible as possible.


You might want to check out the "rec.music.makers.guitar.acoustic"
newsgroup. :-)
  #3   Report Post  
Haolemon
 
Posts: n/a
Default


Blake wrote:
Looking for feedback (pardon the pun)on current signal chains for
acoustic guitar amplification. I am about to take delivery of a new
Taylor with an expression system and a Talyor K-4 equilizer. This

will
feed an acoustic amp (Crate 60 which I will upgrade at some point)

with
reverb and chorus. Any thoughts on other options to add to the chain,
my goal is clean rich full sound that accentuates altered tunings

such
as DADGAD might fool around with more processed sounds a little as an
alternative. I will also run a tuner off the K-4. I have been

searching
for threads and articles on the internet but most are a few years old
nad seem somewhat dated. I want to augment the Taylor signal chain

only
if it makes sense I know it is fine by itself but enjoy looking to

make
it as good and flexible as possible.


You might want to check out Daedalus Cabinets at
www.daedalusmusic.com They make beautiful wood speaker cabinets and
have a lot of good suggestions for amplifying acoustic guitar.
Pendulum makes a great preamp. Get one and pair it with a good power
amp and one the Daedalus speakers and you'll be living large...

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Some Recording Techniques kevindoylemusic Pro Audio 19 February 16th 05 07:54 PM
common mode rejection vs. crosstalk xy Pro Audio 385 December 29th 04 12:00 AM


All times are GMT +1. The time now is 09:09 AM.

Powered by: vBulletin
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"