On Wed, 2 Jul 2003 20:50:33 -0400, Evan wrote
(in message ):

I helped a buddy install on in his Tahoe.

Now his is aftermarket sound like yours is stock.

How it works (or how his works) when you set the parking break, the pedal
makes
a connection, that closes the circuit, that turns the light on your dash
"break" all his system required was to be attach a lead wire to this
trigger.
So when the break light come on so did the DVD, so I got a volt meter and
realized that when the pedal closes the circuit it is grounded, so I got an
alligator clip and grounded the wire, it works, so I permanently grounded
this
instead of attaching to the break.

See if you can get under the break and fine the trigger that turns the dash
light on. See if that lets your DVD work (just the light w/o setting the
break), if so, see if you can find an wire that might lead to the DVD. If
not,
ground the switch perminintly, your break light will be on all the time but
so
will you DVD.

Drive safe . . . yea right


Thanks for the info - what troubles me now is the vss or speed sensor that
tells the nav that I am in motion.

Anyone, Anyone??

thanks

Mark