View Single Post
  #6   Report Post  
Posted to rec.audio.tech
David Nebenzahl David Nebenzahl is offline
external usenet poster
 
Posts: 237
Default why won't this work?

On 5/5/2011 2:31 PM Trevor Wilson spake thus:

dogn4u wrote:

Just curious; I'm covered for a good phono pre, just curious why i
couldn't run my phono thru my Langevin DVC. This two-channel preamp
is what I use to record vocals and acoustic guitar.


**BZZZZZZZTTTT!

You need RIAA equalisation for a phono preamp. You also don't mention
whether you are using a moving magnet, or a moving coil (low output) phono
cartridge. MC carts require further amplification, as well as RIAA
equalisation.


A useless point here, MM vs MM.

If the O.P. is that clueless about needing equalization, chance are slim
to none that they have a moving-coil audiophool cartridge (and Slim just
left town). Don't know why folks always bring this up. The problem is
just no RIAA here.


--
The current state of literacy in our advanced civilization:

yo
wassup
nuttin
wan2 hang
k
where
here
k
l8tr
by

- from Usenet (what's *that*?)