View Single Post
  #5   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default Impedence matching problem

wrote:

I used to have level reducing jack/plug assemblies but don't know where to buy
them, perhaps you could search for level attenuators or matching boxs.


Shure makes nice balanced ones, part A15AS. Everybody should have a handful
of them in a drawer somewhere.

The thing is.... the mike output level is very low.... it's lower than typical
"instrument level." So the odds are that a high level into the pedal is not
the problem. It could be, and an attenuator would tell you for sure, but more
likely it's the output of the pedal that is too hot.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."