Question about series/parallel speaker setup
On 2/10/2010 6:26 PM ShadowTek spake thus:
Assuming that there would be 16 ohms on *both* sides of the parallel
(like I was originally thinking), the power distribution among the four
4-ohms and the one 16-ohm would be the same, right?
4+4+4+4
|______amp
|
16
Yes; half on each side. You basically have a parallel network, so
current divides evenly between the two sides. (Voltage is equal across
both sides.)
--
You were wrong, and I'm man enough to admit it.
- a Usenet "apology"
|