"Lord Hasenpfeffer" wrote in message ...

Fine. What is the associations between limiting/clipping and ATH-based
filtration mechanisms?

There is only the association that you have created by the processes
you espouse to implement.

start focusing on what common sense techniques can
be employed in order to minimize the damage which MP3 encoding
inherently causes to occur, OK?

Already been there... you musta' missed it.

Who musta' missed what?

You musta' missed the 40 or so posts in this thread alone that have provided
information regarding the above point.

Of course, we could go back to the topic that you waffle back and forth
on as to it's importance.... processing the original raw .wav files
with some various other tools before encoding, testing various gain
levels for effectiveness along the way, etc..

Yes, let's.

Do we have a new "Mission Statement" here ?? If so, I must refer you
to the idea of re-reading this entire thread as well as those that rest on
two other newsgroups which address directly the above topic.

I fear we are chatting for the sake of chatting - because at this point, all
people can do is repeat themselves.

--
David Morgan (MAMS)
http://www.m-a-m-s.com
http://www.artisan-recordingstudio.com