RightMark Analyzer Program
"Mike Rivers" wrote in message
On Mar 25, 12:32 pm, Mike Rivers
(that's me!) wrote:
When the level is high enough so that
the test will run, the interchannel crosstalk light on
the RightMark level setting screen keeps going on and
off.
I should add that in a crosstalk measurement made by
recording with a signal on one channel and a shorting
plug in the other channel's input connector, the
crosstalk on playback was rather high, with the
"unrecorded" channel measuring about 45 dB lower than the
recorded channel, at 200 Hz and 10 kHz. Spec is -77 dB or
so at 1 kHz. So maybe this one is broken, but that
wouldn't explain the poor frequency response that RMAA
shows.
Umm, is there a possibility that this laptop only has a mono input? I know
a lot of laptops do.
|