agreed
that would be the best position to place the switch! as long as the output
for L-R is full range from the processor unit (should be i think if you set
it to no subwoofer??)

thanks

"Stewart Pinkerton" wrote in message
news:nzAec.120547$w54.841162@attbi_s01...
On 11 Apr 2004 17:05:10 GMT, Kalman Rubinson wrote:

Easy. Get a switch to go between the preamp and the electronic
crossover that will select feed from the preamp or the L/R feed from
the surround processor. As long as you can set the levels for all
channels in the processor, this should work.

Ah! That's even better than my suggestion, since this doesn't require
attention to the volume setting on the preamp. The true 'high ender'
might bitch about the extra switch contacts in the signal path, but
IMO this is outweighed by the much simpler channel balancing.
--

Stewart Pinkerton | Music is Art - Audio is Engineering