i have 2 amps and one capacitor how should i wire it
In article . com, "Master Of Evil" wrote:
hi i have an MA AUDIO HK401SX amp and an MA AUDIO HK298 amp and one 3
farad capacitor.
the HK401SX will be running 1 MA AUDIO HK12X2 sub at 1 ohm producing
1200watts and the HK298 will be running a set of audiobahn 200watt rms
6.5's and tweeters. do i need to wire the cap to both amps or just the
HK401SX.
also im confused i dont have a 00 ga output or input on my cap how can
i hook it up that way
says not to put a fuse between the cap and amp.
please help me as i am in dire need of assistance lol
CONFUSED AS HELL
Adding a cap will help regardless of wire ga.
There will always be a fuse between amp and cap.
If the amps are close together, put the cap right
there as close as possible to them.
The cap always goes next to the amps.
If the amps are far apart, I would put the cap next to the subwoofer amp.
greg
|