Poor performance from new 5 1/4 inch Polk car speakers ?
"Mark D. Zacharias" wrote:
[my comment]
if it is claimed to have "18 watts pr. channel" then it
probably has some 5 to 9 watts pr channel as amplifier power
is normally measured.
Don't forget bridged outputs, which this almost certainly is.
Figure around 15 watts per channel real-world.
"Music Power" perhaps, but RMS in 4 Ohms, I still think 9 is more like
it but you well be right. It is only about a couple of dB's and the
"treble distortion" as described still points at simple amplifier
clipping as the first concern with the actual setup.
I have also been wondering whether those defunct old loudspeakers in his
roll-bar could be partially or complete short circuited and still in
circuit. But we may have lost the OP in the feud about illitteracy in
the US ....
Mark Z.
Regards
Peter Larsen
|