[Romeo Rondeau]

David Morgan (MAMS) wrote:
"RD Jones" wrote in message...

Mike Miller wrote:
I have an HD24XR and am mixing through an analog console - with the L/R
mixing coming back in to two channels of the HD24XR. The two track mix will
then get's transferred to a computer for some final touch-up with Sound
Forge 8 & CD Architect. I need to wind up with a 44.1k mix of course.

My question is: Should I record/mix everything at 48k (or higher) and then
do a sample rate conversion at the end of the process with Sound Forge or
should I record/track everything at 44.1 from the start? (48K would make my
life a bit easier from a BRC point of view...)


No need for SRC if you:

Playback @ 48k - mix analog - record in SoundForge @ 44.1.

In the absence of adequate A/D conversion after the mixdown
I'd just track 44.1 from the start.

rd


We have a winner....

Really? Does he have a soundcard, or is he just FTP'ing the tracks into
Sound Forge? I'm assuming he's doing this because if he had a Soundcard,
he wouldn't be asking this question.