View Single Post
  #34   Report Post  
S888Wheel
 
Posts: n/a
Default Spread of costs..

From: Lionel ahc
Date: 6/21/2004 3:25 PM Pacific Standard Time
Message-id:

S888Wheel - - mardi 22 Juin
2004 00:13 wrote:

From: Lionel
ahc
Date: 6/21/2004 2:52 PM Pacific Standard Time
Message-id:

S888Wheel - - lundi 21 Juin
2004 23:23 wrote:

From: "Arny Krueger"

Date: 6/21/2004 1:21 PM Pacific Standard Time
Message-id:

"JBorg" wrote in message

Paul Dormer wrote:


I would be interested to see how ppl spread their costs across
components. Here's mine, expressed as ratio. I nominated CD in this
example as it's my most used source.

[CD : AMP : SPEAKERS]
1 : 6 : 12



Speakers ------ 17%

Pwr Amp ------- 17%

PreAmp -------- 18%

CD ------------- 17%

Subw ----------- 15%

Pwr
Conditioner ------ 8%

Just goes to show that you can't ask JBorg a simple question and get a
proper answer. Ask for 3 numbers and he gives you six. Furthermore, it
appears that he apparently can't do the simple math required to express
his results as the ratios that were asked for.









I don't think 3 numbers were specifically asked for. Just a breakdown on
costs of components. His numbers do break down into simple ratios.
Lionel was the only one to screw that one up. Even his was a minor screw
up. There is the missing 8% though. Accessories? Bad math?

Dormer requested a ratio.
A ratio is a ratio. The most popular in the world is named "percent" this
is the one I use like Mr. Borg... But it seems that he lost some bolts &
nuts in way.






Yeah but you didn't break yours down to the lowest common denominator.
JBorg's were broken down so all one had to do is ignore the % symbol and
the answer was there. Yours required a little bit of extra math to be
finished. No big deal.


You should stop to walk on the "cordes"...







You should try to make sense.