Amps for Magneplanar 1.6
"Billy" said:
Help with suggestions to power MG-1.6 its time to retire the
MT-600...thanx..
A powerful MOSFET amp, preferably in class A, is what works best for
me.
You could even try a powerful tube amp, since the impedance curve of
Maggies is relatively straight.
Their efficiency, however, is rather low, so you'll need at least
something like 2 x 100 watts to make them come to life.
In short, you need one of *my* amps ;-)
--
"Due knot trussed yore spell chequer two fined awl miss steaks."
|