trotsky wrote in message hlink.net...
ScottW wrote:
"Kalman Rubinson" wrote in message
...

On Fri, 31 Oct 2003 02:37:07 GMT, "kgs" wrote:


what is the difference b/t line level inputs and speaker level inputs?

Line level inputs are usually coax (RCA), 1-4volts, negligible power
and high impedance (5kohms). Connect to the output of a preamp.

Speaker level inputs are usually paired wires (screw terminals or
binding posts), higher voltage and power (tens of volts and watts) and
low impedance (4-16ohms). Connect to the output of an amplifier.

Kal


Not in my powered sub, Hsu VTF-2 (which I think is the topic)
Speaker level are still high impedance so you don't need any
thick speaker wire to use the speaker level inputs.


Scottie, just out of curiosity, how did "connect to the output of an
amplifier" translate to "you need thick speaker wire" in your syphilitic
brain?

We all know you don't understand the different interconnect
requirements of a low impedance load and a high impedance load. Call
Madisound and for $40 they can help you out.

ScottW