In article ,
Tim wrote:
Here are a couple of pictures of the mystery boxes:

http://members.aol.com/burstontim/

This looks like a bandpass subwoofer intended for a consumer grade
sound system. The crossover is built into the box. Signal goes
into the inputs (from the right and left channel of the amp), and
then there is a high-passed output from the other four channel to
drive the satellites.

The crossover frequency is going to be dependant on the load so it
may not work very well with any other satellites.

Call Tobysound in Glasgow and see if they can identify the satellites
they are intended to go with.

The other unit (without the crossover in it) is probably similar but
intended to be driven from an amp with an active crossover.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."