Thread
:
What kind of failure causes "seashore" noise in a mixer?
View Single Post
#
3
Scott Dorsey
Posts: n/a
GoobAudio philsaudio-remove this and the
wrote:
Semiconductor signal devices. IC's or discrete in the
signal path can do that. The part must be replaced.
Send it to a pro. Usually happens when things warm up
though. Odd.
Is the Alesis Studio 32 one of the Alesis mixers with the carbon pot and
fader elements fabricated on the PC board? If so, it's due to one of the
deposited resistors failing and there isn't much to be done about it.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Reply With Quote