In article 1gkzbv9.4wcf881qcr4suN%mail.addr.can.be.found@www .farm.se writes:

So several "lightweight" and short snakes connected in series i
equivalent to one long. Good. And cheaper too. And easier to handle. I'm
looking for 8 channels 30-50m.

Oh, snakes? No, I wouldn't do that. Too many connectors means too many
possible points of failure. If you want a snake that long, buy a piece
of bulk cable and a bag full of connectors and start soldering.

The 15m ones I've found are 8 channel.

Those are meant for connecting studio equipment and are typically
build with a "squid" (bundle of individual connectors) at both ends.

The 30m+ ones I find are all 16+4 channels

Those are meant for connecting a console to the stage, and are usually
built with a squid on one end and a box with panel mounted connectors
on the other.

Each type is more convenient for its intended application. What's
yours?

--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo