I have not looked at their full catalog to see if they have models which
don't use a standard 120VAC DIN power connector.... the 120VAC ones would
work fine, but I would not use one with a connector that would encourage
accidental application of 120VAC...

Rgds:
Eric

"R. Foote" wrote in message
om...
"Paul Stamler" wrote in message
...

Is there any reason a Corcom filter designed for 120vac wouldn't work on
lower voltages? Higher voltages would be a problem, but lower voltages
shouldn't. Unless I'm missing something about their design.

Peace,
Paul

My question exactly, although I am going to put the filter module in
the case with the power transformer on the 120vac side and bypass the
secondary inside the preamp case with the .01uf bypass.

Roger Foote