"Eric K. Weber" wrote in message ...
Looks like a very nice unit....

You might want to consider changing your grounding, a 6 inch loop antenna
inside the case may cause rf problems... Use the case near each of the
input connectors as your common ground point, preferably with the two
connectors mounted next to each other...

Rgds:
Eric

Eric, Yeah, I tried that too but ended up with more noise. I used #12
wire for the pin #1 gnds all the other gnds are shorter and in a star
configuration. The unit is quieter than my Summit pre and everything
else I was able to compare it with.

roger