Thread
:
dynamic mic in to a soundcard
View Single Post
#
11
Scott Dorsey
Posts: n/a
dynamic mic in to a soundcard
In article znr1069793761k@trad, Mike Rivers wrote:
In article
writes:
No, dynamic mics do just fine with 48V Phantom power all the time. 3V won't
hurt them.
Not 3 volts applied between Pins 1-2 and also Pins 1-3, but not
between hot and ground as would be the "bias" voltage on an unbalanced
mic input typical of the sound cards designed to be used with those $5
condenser mics that you buy at computer storres.
That is NOT phantom power. It's something very different, and folks who
call it phantom power should be ashamed.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Reply With Quote