Car Stereo wire harnesses available (older pullout)

[Barry & Nikki]

If for any reason you need wiring for your older model pull-out car stereo I
have most every if not every harness available. These were used for testing
non-working stereos so all you have to do is plug it in to the back of the
stereo if you do not have the pull-out cage. or if you do but it needs new
wires then just attach the harness in its place. Most that I have seem to
still have mounts. I'm not holding my breath on this but just in case
someone needs wires to get theirs up and running again.

[e-nigma]

"Barry & Nikki" > wrote in message
...
> If for any reason you need wiring for your older model pull-out car stereo
> I
> have most every if not every harness available. These were used for
> testing
> non-working stereos so all you have to do is plug it in to the back of the
> stereo if you do not have the pull-out cage. or if you do but it needs new
> wires then just attach the harness in its place. Most that I have seem to
> still have mounts. I'm not holding my breath on this but just in case
> someone needs wires to get theirs up and running again.
>
>

Is there a web site to look at them?

[Barry & Nikki]

I have a website: http://ww2.whidbey.com/bearmore/carstereos/
but no pictures of any of them being I have so many. I am
willing to work through the process of matching them up though. I would
mainly need a pic of the back of the stereo you are trying to get a harness
for and the manufacturer and model would help. I have other sources
available for research on my end.