Driverproblems wtih Rosetta 800 and Nuendo 3.2.1

[Robin]

I have got the latest update of Nuendo installed and the lastest driver
from Apogee to my Rosetta 800. Sometimes I cant record in Nuendo with
Rosetta. Sometimes I can record in 1, 10 or 20 minuts and then I cant
record from rosetta 800. But I can still see the signals in FireMix
(mixersoftware). Do anyone got this problem or know how to solve the
problem?

[Romeo Rondeau]

"Robin" > wrote in message
oups.com...
>I have got the latest update of Nuendo installed and the lastest driver
> from Apogee to my Rosetta 800. Sometimes I cant record in Nuendo with
> Rosetta. Sometimes I can record in 1, 10 or 20 minuts and then I cant
> record from rosetta 800. But I can still see the signals in FireMix
> (mixersoftware). Do anyone got this problem or know how to solve the
> problem?
>

Outside of the normal cabling and sync problems (you didn't really describe
the problem in great detail), have you checked your project settings in
Nuendo? Is the sample rate correct? Is the project length set correctly? Are
your locators set in a strange place? All of these things can cause Nuendo
to kick out of record when you don't want it to.

[Robbi]

Romeo Rondeau skrev:

> Outside of the normal cabling and sync problems (you didn't really describe
> the problem in great detail), have you checked your project settings in
> Nuendo? Is the sample rate correct? Is the project length set correctly? Are
> your locators set in a strange place? All of these things can cause Nuendo
> to kick out of record when you don't want it to.

The cabling and sync is ok, becase I have been digitalized 50 cassetts
before I got the problem. And I use the same settings and the same
projects. I have recorded in 16bit and 48kHz and 3 steriotracks. I am
using PC (dell Precision 530), Rosetta 800, Nuendu 3.2.1.1153 and a
Maxtor firewiredrive. I have got two dell pc's, two Nuendo and two
rosetta 800 and get the same problems on both systems.

I will check the project lenght, and the placement of the locators!