Alarm System

[Nightcheck]

Hi...

I have a Viper 3000 alarm for my 87 Fiero GT, which up until recently
worked fine. The problem now is - when I arm or disarm the alarm - my
parking lights and brakes are supposed to flash on and off - but they
don't. They both work as I checked that first -

Can anyone shed any light on what could cause this and how t fix it?

Many thanks....

Rick

[e-nigma]

Do the parking lights work with your light switch?
If they do then the problem is the alarm
On the main alarm brain there is a white wire that is used for parking light
flash.
There should be a 7.5 or 10 amp fuse on that white wire
If the parking lights do not work with the light switch
then it is probably your parking light fuse in the vehicle fuse box.
I think your fuse box is on the drivers side underdash near the firewall

"Nightcheck" > wrote in message
ps.com...
> Hi...
>
> I have a Viper 3000 alarm for my 87 Fiero GT, which up until recently
> worked fine. The problem now is - when I arm or disarm the alarm - my
> parking lights and brakes are supposed to flash on and off - but they
> don't. They both work as I checked that first -
>
> Can anyone shed any light on what could cause this and how t fix it?
>
> Many thanks....
>
> Rick
>

[Nightcheck]

Yes - The parking lights work with my light switch -
On this main alarm brain you mentioned - any idea where it normally
would be? i.e., under the dash, in the engine area, etc ??
----------------------------------------------------------------------------------------------------------------------------
e-nigma wrote:
> Do the parking lights work with your light switch?
> If they do then the problem is the alarm
> On the main alarm brain there is a white wire that is used for parking light
> flash.
> There should be a 7.5 or 10 amp fuse on that white wire
> If the parking lights do not work with the light switch
> then it is probably your parking light fuse in the vehicle fuse box.
> I think your fuse box is on the drivers side underdash near the firewall
>
> "Nightcheck" > wrote in message
> ps.com...
> > Hi...
> >
> > I have a Viper 3000 alarm for my 87 Fiero GT, which up until recently
> > worked fine. The problem now is - when I arm or disarm the alarm - my
> > parking lights and brakes are supposed to flash on and off - but they
> > don't. They both work as I checked that first -
> >
> > Can anyone shed any light on what could cause this and how t fix it?
> >
> > Many thanks....
> >
> > Rick
> >

[e-nigma]

most likely place is under the driver side dash


"Nightcheck" > wrote in message
ups.com...
> Yes - The parking lights work with my light switch -
> On this main alarm brain you mentioned - any idea where it normally
> would be? i.e., under the dash, in the engine area, etc ??
> ----------------------------------------------------------------------------------------------------------------------------
> e-nigma wrote:
>> Do the parking lights work with your light switch?
>> If they do then the problem is the alarm
>> On the main alarm brain there is a white wire that is used for parking
>> light
>> flash.
>> There should be a 7.5 or 10 amp fuse on that white wire
>> If the parking lights do not work with the light switch
>> then it is probably your parking light fuse in the vehicle fuse box.
>> I think your fuse box is on the drivers side underdash near the firewall
>>
>> "Nightcheck" > wrote in message
>> ps.com...
>> > Hi...
>> >
>> > I have a Viper 3000 alarm for my 87 Fiero GT, which up until recently
>> > worked fine. The problem now is - when I arm or disarm the alarm - my
>> > parking lights and brakes are supposed to flash on and off - but they
>> > don't. They both work as I checked that first -
>> >
>> > Can anyone shed any light on what could cause this and how t fix it?
>> >
>> > Many thanks....
>> >
>> > Rick
>> >
>