Spookeh_kitty via CarKB.com
May 26th 06, 01:22 PM
Ok, I had problems with my speakers output in my car.. There wasnt sound,
even when the radio was on and set to a station. I have a head unit, with a
RCU mounted in the truck, and the RCU has a factory amp built in. Now, I had
my own amp in it, and wires got crossed for a second, they hummed, and when
then the wires were pulled apart. I figured that i had blown my amp at first
(didnt know about the factory amp) and completely disconnected it, returning
all connections back to the factory state. Still no sound, even though the
radio was working. Checked connections, fuses, etc. All fine. On here, I
learned about the factory RCU/Amp. I figured that amp as well was blown. If
so.... The speaker wires should have input into the amp, just since the amp
is blown the sound doesnt pass 'Through' the amp.... Correct??? So perhaps if
I splice one speaker connection (Both negative and positive) before they
enter the factory amp, and attach the neg and pos directly into a speaker....
shouldnt they're be sound???? I done this, and, well... there wasnt any sound.
... Does this mean the factory amp ISNT the problem? Perhaps its something
BEFORE the amp? Help??
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/car-audio/200605/1
even when the radio was on and set to a station. I have a head unit, with a
RCU mounted in the truck, and the RCU has a factory amp built in. Now, I had
my own amp in it, and wires got crossed for a second, they hummed, and when
then the wires were pulled apart. I figured that i had blown my amp at first
(didnt know about the factory amp) and completely disconnected it, returning
all connections back to the factory state. Still no sound, even though the
radio was working. Checked connections, fuses, etc. All fine. On here, I
learned about the factory RCU/Amp. I figured that amp as well was blown. If
so.... The speaker wires should have input into the amp, just since the amp
is blown the sound doesnt pass 'Through' the amp.... Correct??? So perhaps if
I splice one speaker connection (Both negative and positive) before they
enter the factory amp, and attach the neg and pos directly into a speaker....
shouldnt they're be sound???? I done this, and, well... there wasnt any sound.
... Does this mean the factory amp ISNT the problem? Perhaps its something
BEFORE the amp? Help??
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/car-audio/200605/1