heads unit bypass

[CarMox]

Hi,

I have an old Sony cassette car stereo with the tape dragging mechanismm
broken (but not the loading one)
Actually I use a cassette adapter with an external source with modest
result.
I opened the adaptor and I seen that the signal cable is directly attach
(apart three resistances) to the
head.
Now I was thinking if is possible to attach the external signal after
the car stereo head units and bypass the double conversion of two head
units.
Theoretically I would have to obtain better quality with an home made
LINEIN input

Is possible?

[Vivek]

The signal from the cassette head goes to the pre-amp stage then audio
processing and then amplifier. You can put the line in at the output of the
pre-amp of the sony cassette player. But this would require external help.
Or search for any online service manual of this deck.


"CarMox" > wrote in message
...
| Hi,
|
| I have an old Sony cassette car stereo with the tape dragging mechanismm
| broken (but not the loading one)
| Actually I use a cassette adapter with an external source with modest
| result.
| I opened the adaptor and I seen that the signal cable is directly attach
| (apart three resistances) to the
| head.
| Now I was thinking if is possible to attach the external signal after
| the car stereo head units and bypass the double conversion of two head
| units.
| Theoretically I would have to obtain better quality with an home made
| LINEIN input
|
| Is possible?

[Chad Wahls]

There is also EQ built into that preamp to make up for the head frequency
response.

Chad

"Vivek" > wrote in message
...
> The signal from the cassette head goes to the pre-amp stage then audio
> processing and then amplifier. You can put the line in at the output of
> the
> pre-amp of the sony cassette player. But this would require external help.
> Or search for any online service manual of this deck.
>
>
> "CarMox" > wrote in message
> ...
> | Hi,
> |
> | I have an old Sony cassette car stereo with the tape dragging mechanismm
> | broken (but not the loading one)
> | Actually I use a cassette adapter with an external source with modest
> | result.
> | I opened the adaptor and I seen that the signal cable is directly attach
> | (apart three resistances) to the
> | head.
> | Now I was thinking if is possible to attach the external signal after
> | the car stereo head units and bypass the double conversion of two head
> | units.
> | Theoretically I would have to obtain better quality with an home made
> | LINEIN input
> |
> | Is possible?
>
>