PDA

View Full Version : Setting gains on my amp for better highs

[email protected]
December 7th 05, 05:34 AM
Hi,

I just purchased an Alpine Amplifier (MRP-F240) and would like to know
how to adjust the gains to get more highs. Do I turn them left or
right? And is it nessasary to turn my volume up to the max to check for
distortion. It's already been installed in my car but it dosen't have
enough highs for me. I have SPS-690A's in the rear and SPS-171A's in
the front. Any help would be appreciated, I really don't have a clue on
how to do this.

thanks
Socks
Arny Krueger
December 7th 05, 12:17 PM
> wrote in message
oups.com
> Hi,
>
> I just purchased an Alpine Amplifier (MRP-F240) and would
> like to know how to adjust the gains to get more highs.
> Do I turn them left or right? And is it nessasary to turn
> my volume up to the max to check for distortion. It's
> already been installed in my car but it dosen't have
> enough highs for me. I have SPS-690A's in the rear and
> SPS-171A's in the front. Any help would be appreciated, I
> really don't have a clue on how to do this.

Good question for rec.audio.car, no?
[email protected]
December 7th 05, 08:30 PM
Arny Krueger wrote:
> > wrote in message
> oups.com
> > Hi,
> >
> > I just purchased an Alpine Amplifier (MRP-F240) and would
> > like to know how to adjust the gains to get more highs.
> > Do I turn them left or right? And is it nessasary to turn
> > my volume up to the max to check for distortion. It's
> > already been installed in my car but it dosen't have
> > enough highs for me. I have SPS-690A's in the rear and
> > SPS-171A's in the front. Any help would be appreciated, I
> > really don't have a clue on how to do this.
>
> Good question for rec.audio.car, no?
[email protected]
December 7th 05, 08:38 PM
For my car.
[email protected]
December 13th 05, 03:53 PM
wrote:
> Hi,
>
> I just purchased an Alpine Amplifier (MRP-F240) and would like to know
> how to adjust the gains to get more highs. Do I turn them left or
> right? And is it nessasary to turn my volume up to the max to check for
> distortion. It's already been installed in my car but it dosen't have
> enough highs for me. I have SPS-690A's in the rear and SPS-171A's in
> the front. Any help would be appreciated, I really don't have a clue on
> how to do this.
>
> thanks
> Socks